
ElenaTap a question. I will show you the steps.
Start here
How do I see my roof in metal?
- Tap a photo in the row under See your roof in metal, or tap Your photo at the end of the row.
- Wait while the roof is found. On a phone it can take up to a minute.
- Tap Roof under the photo, then tap a color.
- Drag across the photo. After is on the left, before is on the right.
How do I use a photo of my house?
- Tap Your photo at the end of the photo row.
- Pick a JPEG or PNG picture. A daylight photo taken from the street works best.
- Wait while the roof is found, then pick a color.
How do I get to the other quote pages?
- Look at the bar at the very top. Every page has its number: 1 Buildings, 2 Carports, 3 Doors, 4 Windows, 5 Roof.
- Tap the page name. It opens that page.
- On a phone, slide the bar left or right to see every page.
How do I undo a mistake?
- Tap ↶ Undo at the top right.
- Tap ↷ Redo to put it back.
The roof
How do I pick the panel color?
- Tap Roof under the photo.
- Tap a color. Its name shows above the colors.
How do I pick the panel?
- Tap Roof under the photo.
- Tap Exposed fastener (AG) · ribs 9″ on center or Standing seam · seams 16″ on center.
How do I draw the ribs to true size?
- Tap Roof under the photo.
- Type the eave length in Eave length (ft).
- The ribs are then drawn to scale for that length.
My roof is already metal
- Tap Roof under the photo.
- Tap Use your roof's real ribs (it's already metal).
The color missed part of the roof, or covers something else
- Tap Adjust under the photo.
- Tap Select roof areas, then tap the photo.
- Tap a part that was missed to add it. Tap a colored part that is not roof to take it off.
- Tap Done selecting when you are finished.
- Undo steps back one tap. Re-detect starts over.
How do I change the shine?
- Find Finish beside the tabs.
- Slide Shine left for flat, right for shiny.
Trims
How do I pick the trim color?
- Tap Trim under the photo.
- Tap a color to set every trim at once.
- Or pick a profile and a color for each trim in the list below the colors.
How do I see a trim's size and length?
- Tap a trim on the photo. A box shows its size, length and pieces.
- Tap Labels on the photo to name every trim. Tap Trims to show or hide the trims.
How do I see where the panels and trims go?
- Tap Layout under the photo.
- Tap Show panel & trim layout. It shows the seams, ribs, purlins and trims on the photo.
Materials list
How do I get a materials list?
- Tap Materials under the photo.
- Type the panel length (eave to ridge) for each roof, like 26' 4½" or 26 4 1/2.
- Pick 29 or 26 gauge, standard or crinkle, and the other options.
- Tap Open materials list, Copy list or Save list (.csv).
How do I make one list for the whole house?
- Tap Materials, then From the photo.
- Tap Add this photo's roofs to the whole-house list.
- Do the same for each photo of the house.
- Tap From measurements and check that every real slope is listed once.
Are the measurements exact?
- No. Sizes from a photo are estimates.
- Measure your roof to verify before you order.
- Ask 501 Metals for a color sample. Colors on a screen are not exact.
You must measure your roof to verify. We are not responsible for the accuracy of the take off.
Not to scale. Colors and sizes vary. Ask for a physical color sample before ordering.